Note:
Only one charger at a time can be connected to PDM. A Rackmount Charger can
Note:
hold one or more cordless telephones though.
Figure 80: Charger connection to the PDM
Parameters can be edited for a single device and then sent to the device, but if many devices
are to be updated with new parameter settings it is also possible to create a parameter template
and run the template on each Number.
Parameters can be uploaded from a connected device, edited and sent to the device again. If
the PDM shall store parameter settings in the site database or not, is selectable.
When editing parameters there are help texts to assist in writing the correct parameter format.
Devices can be upgraded with new software. A text and a status bar indicates that the
connected device is being updated with the new software.
Requirements
See the Data Sheet for WinPDM
Avaya DECT R4 - Installation and Maintenance Guide
Advanced Desktop
Charger
.
Introduction
317
02/2016