Avaya DECT R4 Installation And Administration Manual page 420

Installing and operating the AIWS and the AIWS2
Figure 116: The Create devices dialogue
3. Select device type and parameter version.
4. Enter a Device ID for the device manually or by usng a bar code reader.
5. To keep the Create devices dialogue open after clicking Create, select the Continuous
registration check box.
6. If the bar code reader does not send carriage return, click Create.
Note:
If you try to add more devices than allowed, the following dialogue window
Note:
appears, see below. For more information, see
handling
Figure 117: Dialogue window
7. Repeat 4 to 6 if more devices are to be created, otherwise click Close.
Assigning a number to a device
Note:
This feature is not applicable for fixed devices.
Note:
420
Avaya DECT R4 - Installation and Maintenance Guide
on page 422.
License restrictions for device
02/2016