Owner Identification In The Idle Display; Profiles - Avaya DECT R4 Installation And Administration Manual

Note:
Changing these parameters may result in lower sound quality such as noise and
Note:
echo. If audio problems occur, it is noticeable for the person listening on the
conversation. Evaluate carefully before applying.

Owner identification in the idle display.

You can add owner identification in standby mode of the telephone. In a template or Number in
PDM/AIWS, the parameter is found at:
Settings > Owner ID
Note:
You can configure the Owner ID using the telephone menu. See User Manuals for
Note:
corresponding telephones.

Profiles

This feature is included in 3725, 3740, 3745, and 3749, but not in 3720.
You can set up an own profile for incoming calls, message alerts, vibrating alerts, key sound etc.
This can be useful when there are many users on the same telephone, and they want different
sound profiles. It can also be used for temporarily settings, for example while in a meeting,
incoming calls should be silent.
Profiles are configured via parameters in the Profiles folder.
Note:
It is also possible to configure profiles using the telephone menu. See User
Note:
Manuals for Avaya 3725, 3740, 3745, and 3749 telephones.
Push-to-Talk (PTT) group call
When the user initiates a PTT session on the handset by sending an invitation, the handset
sends a message to the AIWS2 with the phone number to the conference bridge (in this
example, the number is 9999). When the AIWS2 has found the PTT group, it forwards the
message to all members in the group, including the initiator if the initiator is a member.
When the PTT session is accepted, either manually or automatically, the handset is connected
to the number that handles the conference/group calls, and all handsets in the PTT group are
connected.
Avaya DECT R4 - Installation and Maintenance Guide
Telephone configuration
237
02/2016