From the application's Configuration page:
1 Click "Configuration" on the start page.
2 Select Other Settings > Demonstration Mode in the menu on the Configuration page.
3 Click "Activate".
4 Exiting before the 2 hours have passed, is done by clicking "Deactivate".
Using the Mode button:
1 Press and hold the Mode button for 10 seconds.
Operation
Messaging
Creating and sending messages requires no password and can be done by any user in the
system. Depending on the license, the following tools for messaging are displayed:
Messaging tool - included if license does not include NetPage
●
NetPage - included in Avaya AIWS2 Standard license
●
Figure 99: Messaging button on AIWS start page
For configuration of the Messaging Tool, see
Messaging Tool
The Messaging Tool GUI is displayed on AIWSs without additional license.
Avaya DECT R4 - Installation and Maintenance Guide
Operation
on page 387.
Operation
387
02/2016