Avaya DECT R4 Installation And Administration Manual page 469

5. In the selected log page, enter settings. Click Activate.
Time Settings
It is possible to select where to fetch the time from, such as a web browser or a time server.
1. Click Configuration on the start page. The Configuration page appears.
2. Select Other Settings > Advanced Configuration in the left menu in the AIWS
Configuration page. The Advanced Configuration page appears.
3. Under Time, click Settings The Time settings page appears.
Figure 150: The Time Settings page.
4. Enter time settings.
5. Click Activate.
The following parameters can be set via the Advanced Configuration page. Some of these
parameters can also be set in the Setup wizard.
Time source
●
Time server address
●
Fault log
●
Time zone
●
Avaya DECT R4 - Installation and Maintenance Guide
Basic Configuration
469
02/2016