Actions When Telephone Is Placed In Charger - Avaya DECT R4 Installation And Administration Manual

Configuring Avaya DECT phones
Enabling/Disabling Switch Off function
You can prevent that the handset from being switched off by a user.
1. Select Customization > Phone restrictions
2. In the Prevent switch off handset drop-down list, select one of the following:
Yes - The user will not be able to switch off the handset by pressing the On-hook key.
●
No - The switch off restriction is disabled.
●
Enabling/Disabling call list
You can disable the call list on handset to prevent an unauthorized person from viewing calls in
the the call list.
1. Select Customization > Phone restrictions.
2. In the Possible to enable call list drop-down list, select one of the following:
Yes - The handset will store the calls in the Call list.
●
No - The handset will not store any calls in the Call list.
●
Note:
Old incoming and outgoing calls (if any) will not be deleted in the Call list when
Note:
setting the parameter to No. It is recommended to clear all call lists (if any) to
ensure that no old calls are stored.

Actions when telephone is placed in charger

In Charger action when not in call
The telephone can be configured to switch off, turn the sound off, or redirect calls when it is
placed on a charger. The selected action is only performed when no call is established. When
the telephone is removed from the charger, it returns to previous settings.
1. Select Connections > In Charger.
2. In the In charger action drop-down list, select one of the following:
No action - No action will be performed when telephone is placed on charger.
●
Switch off - The telephone will be switched off when placed on charger.
●
Sound off - The telephone will be silenced when placed on charger (not available in
●
Integral mode).
1. If the parameter "Possible to turn off sound" is set to "No", the device will not be muted when placed in charger.
228
Avaya DECT R4 - Installation and Maintenance Guide
1
02/2016