Avaya DECT R4 Installation And Administration Manual page 591

Creating a backup of the software settings
Normally the backup is done from the application's web interface but it can also be done in Boot
Mode.
1. Put the module in Boot Mode, see
2. Select Software > Install software.
3. Click the "Backup" button. All settings for last run software will be saved.
4. Click "Save" in the File Download window.
5. Select where to save the file and click "Save" again.
Performing a field upgrade of the boot software
By using a USB memory stick with a Boot software (autoupdate.bin), the module can be
upgraded on the field.
1. Insert the USB memory stick in the upper USB connector marked.
2. Perform a controlled restart via the Restart button, by pressing the button and releasing it
within 4 seconds.The Status LED indicates shutting down with quick flashing blue light.
Before starting up again, the Status LED will indicate "waiting" for one minute with fixed
yellow light.
3. When the Status LED indicates starting up with quick flashing blue light, press the Mode
button within 3 seconds. The Mode button should indicate by showing fixed blue light .
The module now detects the memory stick and begins the upgrade process which is indicated
by the Status LED with fixed yellow light . The upgrading process takes 7-8 minutes.
After the upgrade process has finished, the module will continue and start up the last used
application software. The complete operation can take up to 10 minutes.
To verify a successful upgrade, you can put the USB stick back in your PC and open the file
autoupdate.log. In the end of that file, you should then see the text "Upgrade finished
successfully".
Note:
If the USB memory stick contains faulty Boot software, the module will start up in
Note:
Boot Mode.
Resetting back to factory default settings
Resetting the module's application software back to factory default settings can be done from
the application's web interface on the Configuration page under Software. Either by switching
software or reinstalling software and selecting factory default settings.
Avaya DECT R4 - Installation and Maintenance Guide
Maintenance information for the AIWS2
Starting in boot mode on page 565.
02/2016
591