Avaya DECT R4 Installation And Administration Manual page 154

Installing and operating the IPBS and IPBL
3. Enter the Message Center Number in the Fix Message Center No. field.
4. Click OK.
5. Reset in order to make the changes take effect, see
Figure 46: Supplementary services
Selecting Mode
The IPBS/IPBL can operate in four different modes: Master, Standby Master, deployment and
off.
1. Select DECT > Master.
2. In the Mode drop-down list, select:
"Off", if this IPBS/IPBL is not a Master.
●
"Active", if this IPBS/IPBL is the Master.
●
"Standby", if this IPBS/IPBL is the Standby Master.
●
"Deployment" is used for coverage test only. The speech from the handset is looped
●
back to the handset.
"Mirror", if this IPBS/IPBL is the Mirror. For information about Mirror devices, see the
●
system description for IP-DECT.
154
Avaya DECT R4 - Installation and Maintenance Guide
Reset on page 190.
02/2016