Avaya DECT R4 Installation And Administration Manual page 153

Note:
For Brazil, the following carriers shall be selected only: 0, 1, 2 and 3.
Note:
3. Click OK.
Configuring coder
Select the preferred coder, and enter the desired frame length. If you select exclusive for the
coder, the IPBS/IPBL is forced to use that coder. When you enable Silence Compression no
information is sent during pauses in the conversation which saves bandwidth.
Note:
If you enable exclusive for a coder you cannot make calls outside the IP-DECT
Note:
system. G450 system only supports G.711A/
not supported.
See Enabling SRTP on the base stations.
1. Select DECT > System.
Note:
To access the System tab, the Master mode has to be activated, see
Note:
Mode
2. Choose the applicable coder in the Coder drop-down list.
3. Enter the sample time in milliseconds in the Frame text field.
4. Select or clear the Exclusive check box.
5. Select or clear the Silence Compression check box.
6. Click OK.
Configuring Supplementary Services
The supplementary services handle the defined dial codes locally in the IPBS/IPBL master. All
other dial codes to be forwarded to the Call Manager must be configured on Master and
Standby Master.
1. Select DECT > Suppl. Serv.
Note:
You must activate the Master mode to access the System tab. See
Note:
Mode
2. Select the Enable Supplementary Services check box to activate the supplementary
services below. The default Activate feature code is preset.
Note:
To disable a specific service, select the Disable check box next to the option.
Note:
Avaya DECT R4 - Installation and Maintenance Guide
on page 154.
on page 154.
μ
Law, G.729a, Coder G723-53 is
on page 166
Operation
Selecting
Selecting
153
02/2016