Avaya DECT R4 Installation And Administration Manual page 108

Installing and operating the IPBS and IPBL
4. Set a static IP address and set DHCP to off, See
5. Set the mode to Master. See
6. Reset to restart the IPBS in Master mode. See
7. Select DECT > System and enter the password.
8. Select the system name and password. See
page 149.
9. Set the default language. See
10. Select the supplementary services. See
page 153.
11. Set the frequency band. See
12. Configure the Master ID. See
13. Select the PBX. See
14. Set the Master IP address to 127.0.0.1. See
Master on page 162.
15. Reset and restart the IPBS/IPBL in Master mode. See
If you cannot access the Master from a certain PC after the reset;
Open a command window in windows by selecting Start > Run and enter cmd in the
●
Open: text field.
Enter the following commands
●
arp -d
nbtstat -R
Restart the we browser.
●
16. Select supplementary services. See
17. Assign PARI. See
18. Enter SARI. See
19. Enter the AIWS2 IP address. See
management
20. Configure air synchronization. See
21. Enter the Time Server address. See
22. Reset the system so that the configuration changes take effect. See
For more detailed information, see the corresponding subsection in
108
Avaya DECT R4 - Installation and Maintenance Guide
Selecting Mode
Setting the default language
Setting the frequency band
Configuring Master ID
Configuring IP-PBX
(Delete the arp cache)
(Empty the nbtstat cache)
PARI on page 163.
SARI on page 164.
Configuring messaging
on page 169 and Configuring the location
Configuring air synchronization
Setting a static IP address
on page 154.
Reset on page 190.
Changing the system name and password
Configuring Supplementary Services
on page 152.
on page 155.
on page 155.
Entering the IP address to the PARI
Reset
Configuring Supplementary Services
on page 169,
on page 169.
Configuring the NTP settings
on page 141.
on page 150.
on
on page 190.
on page 153.
Device
on page 164.
on page 128.
Reset on page 190.
Operation on page 115.
on
02/2016