Quick Access To The Telephone Information/Sst Menu - Avaya DECT R4 Installation And Administration Manual

Configuring Avaya DECT phones
Admin Menu (continued)
Factory Reset
1. Centr. Management shows the status of the handset for the maintenance:
DECT: over the air status
Eth/USB: DC4/RC3 status
Firmware download status
Synch status
!
Important:
The Frequency Band selection is only available in a factory fresh handset or after a factory
reset. This setting can never be changed if it was done once. A wrong
configuration will result that the handset will not operational anymore and
needs to be sent back to the Avaya repair center. The default setting is "EU
US China" what will result in a auto detect mode for the different frequency
bands. This setting needs only to be changed for users in Latin America and
Brazil.
The currently used frequency band can be found on the Device info > Hardware
page.

Quick access to the telephone information/SST menu

For quick access to device information, short codes can be used in the idle menu. To display
this information, enter the following codes in the telephone.
244
Avaya DECT R4 - Installation and Maintenance Guide
Brazil
Information
Software version
Hardware version
IPEI
IPDI
User ID
Open Site Survey tool menu
Code
*#34#
*#34#
*#34# or *#06#
*#34# or *#06#
*#34#
*#77#
02/2016