Status - Avaya DECT R4 Installation And Administration Manual

1. Click Configuration on the Start page.
2. Select Activity Log > Log Export in the menu on the Configuration page.
3. Select Enable in the drop-down list.
4. Click the Add Syslog entry button.
5. Enter the Syslog Server's IP address in the text field.
6. Click Save.

Status

On these pages, information on active faults or stored faults can be shown.
Active faults
The last 100 received active fault logs are listed on the Active Faults page. For more information
about the fault log, refer to
1. Click Configuration on the start page.
2. Select Status > Active Faults in the left menu on the AIWS Configuration page to open
the page.
The following information is shown for each fault:
Time when the fault occurred
●
Level of the fault:
●
- Critical error
- Error
- Warning
Avaya DECT R4 - Installation and Maintenance Guide
Fault log on page 457.
Basic Configuration
455
02/2016