Avaya DECT R4 Installation And Administration Manual page 411

3. Select device type in the Device type list.
4. Select the parameter version in the Parameter version list. All parameters except Number
specific parameters will be set to their default values.
5. Select which template to run on the Number. This is optional at this stage and therefore
None can be selected.
6. If you want to create a single Number, select the Single option and enter the call number
in the Call number text box. It is recommended to use the telephone extension of the
handset as the number in the AIWS.
7. If you want to add a range of Numbers, select the Range option. Enter the start call
number in the Start call no. text box, and the end call number in the End call no. text box.
Note: The maximum range that can be added at a time, is 100 Numbers.
8. Click OK. The dialogue closes and the new Numbers show up the list in the Numbers view.
Note:
If you try to add more numbers than allowed, the following dialogue window
Note:
appears, see below.
Figure 112: Dialogue window, maximum numbers allowed (example)
Saving a number to Database
An online device can be saved to the database.
1. Select the Numbers tab.
2. Select the Number.
3. In the Number menu, select Save. Alternatively, right-click the Number and select Save.
Note:
An online device can automatically be enabled and saved (default), see
Note:
Automatically enabling new devices settings
Avaya DECT R4 - Installation and Maintenance Guide
on page 438 for more information.
Device Manager
411
02/2016