Avaya DECT R4 Installation And Administration Manual page 414

Installing and operating the AIWS and the AIWS2
Figure 114: Selected template to run on one or several Numbers
4. Select a template from the Template list.
Note:
If multiple templates are selected only one of them will be executed.
Note:
5. Click OK.
If the parameters in the database have been edited but not yet sent to the device it is
indicated with Not synched or Updated queued.
If the Number has not been associated with a device, it is now possible to do so. Connect a
device and associate it with a Number in the database. The parameters will automatically be
sent from the Device Manager to the device. See
page 414.
Associating a number with a device
Before being able to synchronize parameters between AIWS and devices, it is necessary to
associate a Number with the device. It is possible to enter several Device ID's in advance and to
associate them with a Number at a later moment.
See also Assigning a number to a device
1. Select the Numbers tab.
414
Avaya DECT R4 - Installation and Maintenance Guide
Associating a number with a device
on page 420 and Adding a new device
on
on page 419.
02/2016