Avaya DECT R4 Installation And Administration Manual page 337

4. In the Parameter version drop-down list, select the parameter version.
5. In the Template drop-down list, select which template to apply to the Number. This is
optional and therefore "None" can be selected.
6. In the Prefix field, enter the Number's prefix (if needed).
7. Select one of the following options:
To create a single Number, select the Single option and enter the call number.
●
Note:
To create a range of Numbers, select the Range option. Enter the start call
Note:
number, end call number.
NOTE: The maximum range that can be added at a time is 100 Numbers.
8. Click the OK button.
Save a Number to Database
The number of an online device can be saved to the database.
1. Click the Numbers tab.
2. Select the device which number to be saved.
3. From the Number menu, select Save.
Enter/Edit Description of a Number
It is possible to enter information of a Number using WinPDM. For example, the description can
be used to describe a user of a number.
1. Click the Numbers tab.
2. Select the number which description to be edited.
3. From the Number menu, select Enter description.
4. Enter an appropriate description and then click the OK button.
Edit Parameters
The Edit Parameters window shows the set of parameters for the Device/Number. The
parameters are organized in a tree structure in the left pane, with the parameters in the current
node in the right pane. Clicking the
Note:
If Edit parameters was selected in the Device Wizard window, or in the New
Note:
Number Wizard window, continue from step 4.
1. Click the Numbers tab.
Avaya DECT R4 - Installation and Maintenance Guide
icon will give a short description of selected parameter.
Operation
337
02/2016