Change The Default Password - Avaya IPBS1 Installation And Operation Manual

4. Enter http://xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the determined IP address) in the
browser to access the GUI.
5. After the first startup of the IPBS/IPBL do the following:
On the IPBS: Select LAN1 > DHCP
On the IPBL: Select LAN1 > DHCP
6. In Mode drop-down list, change the DHCP mode from "automatic" to "client" or "disabled".

Change the Default Password

1. Enter the IP address determined in Determine the IP Address in the web browser address
field.
2. Select General > Admin.
3. Enter user name and password in the dialog box.
Default user name is: admin.
Default password is: changeme.
4. Enter a user name in the User Name text field.
5. Enter a password in the Password text field. Repeat the password in the second text field.
6. Click "OK".
56
Avaya 374x DECT Telephones - User Guide
Figure 15.
02/2016