Avaya DECT R4 Installation And Administration Manual page 301

Measure and mark the drill holes by using the dimensions in
Rackmount Charger on the wall with four screws.
Figure 71: Mounting dimensions in mm
Rackmount Charger seen from the back
Electrical installation
Power supply by power cord to wall outlet
The Rackmount Charger is delivered with a cord with an IEC C14 connector (male). An
extension cord IEC C13 AC connector (female, IEC60320-C13) to wall socket has to be ordered
separately. It shall be connected between the pre-installed AC connector (male) and the wall
socket.
Avaya DECT R4 - Installation and Maintenance Guide
400
290
Installation and configuration
figure 71. Drill and fasten the
02/2016
301