Add Users; Anonymous Registration; Add Users In The Ip-Dect System; Assign Handsets To Users - Avaya IPBS1 Installation And Operation Manual

Add Users

This section describes how to add users to the IP-DECT system. The IPEI, which is the unique
identification number of the handset, can be registered in two ways:
Anonymous Registration can be used in en existing IP-DECT system. Instead of the
l
administrator collects all the handset, the user of the handset does the registration. The
IPEI is automatically associated to the user, see
Individual Registration can be used if a few new handsets shall be added to the IP-DECT
l
System. The IPEI is entered manually, see

Anonymous Registration

Anonymous Registration is done in two steps. First, the user is registered in the IP-DECT
System. Second, the handset is assigned to the user from the handset.

Add users in the IP-DECT System

1. Under Administration, select "Users".
2. Click "New".
3. Enter the following information in the corresponding text fields, leave the IPEI / IPDI text
field empty, do not remove the automatically generated Auth. Code:
4. Click "OK".
5. Repeat step 2 to 4 for all users.

Assign Handsets to Users

1. Select DECT > System.
68
Avaya 374x DECT Telephones - User Guide
Field name Description
• Long Name The name of the user, need to be unique throughout the
system. This is the name presented in a called party´s
display, unless this is configured in the IP-PBX.
• Display Name Optional, will be shown in the handset display when the
handset is idle.
• Name Optional, the user name.
• Number Mandatory, the phone number extension, need to be
unique throughout the system.
• Password Optional, is used for registration towards the gatekeeper.
Anonymous Registration
Individual Registration
on page 68.
on page 69.
Max.
characters
30
30
30
30
30
02/2016