Table of Contents
Advertisement
Note
The temperature offset can be set up
to a range of 5.5ºC or 10.0ºF.
the Set button when you have achieved the
desired setting. The display will return to normal
operation within a few seconds, displaying the
actual temperature.
In the example above, you would set the display
to read -1.
Emptying and Cleaning the Unit
Please be advised that stainless steel can and will rust if
not regularly cleaned and properly maintained. It is rec-
ommended that the bath be cleaned at least on a monthly
basis for moderate or continuous use applications. Follow
these steps to empty and clean the unit after using it:
1.
Turn off power, unplug the unit, and allow to
cool completely.
2.
If you have a water bath of 2 or 5 liter capacity,
pour the liquid from the unit into an appropriate
disposal container.
3.
If you have any other size water bath, allow the
unit to cool and use the hand pump to empty the
unit into an appropriate disposal container.
4.
Clean the inside of the water bath with mild
detergent (such as Joy dishwashing detergent)
and warm water. Do not scrub any surface with
steel wool. (Steel wool leaves small metal parti-
cles behind that will rust, causing the pan to
look rusty). In instances where a heavy coating
of residue has accumulated inside the tank or
where there is evidence that corrosion is begin-
ning, the use of a stainless steel cleaner (such
as 3M Stainless Steel Cleaner and Polish) is
recommended.
5.
Rinse and wipe all tank surfaces with clean
water.
6.
Unit is now ready for next use.
O
PERATION
15
Advertisement
Table of Contents
