Changing the COM Port Settings
During the LabWriter Installation process (see LabWriter Operator Guide, Chapter 1 - Installing the LabWriter
Application) the software should automatically detect the PrintMate and determine the correct COM Port
Setting.
However, if LabWriter does not detect the PrintMate instrument the COM Port can be set manually.
The procedure for this is as follows:
Ensure PrintMate is connected to the PC, is switched on and the Touch Panel Display shows PrintMate
Ready.
Open the Windows Control Panel.
Double-click on the System icon to display the System Properties window.
In the System Properties window click on Device Manager.
Operator Guide
41