Analyzing Cholesterol With The Ion Trap Series - Thermo Scientific DSQ Series User Manual

1
Using a Direct Insertion Probe (DIP)

Analyzing Cholesterol with the Ion Trap Series

Analyzing Cholesterol with the Ion Trap Series
4 Ion Trap and DSQ Series Direct Probe System User's Guide
Note Ion Trap Series refers to both the PolarisQ and ITQ mass spectrometers.
Using an Ion Trap Series, analyzing sample involves these steps:
"Step 1: Connect the Direct Probe System"
"Step 2: Change the Ion Volume"
"Step 3: Deselect AS and GC Devices"
"Step 5: Program the DPC"
"Step 6: Prepare the Sample"
"Step 7: Create a Method File"
"Step 8: Create a Sequence File"
"Step 9: Insert the Probe Using Xcalibur"
"Step 10: Remove the Probe Using Xcalibur"
"Step 11: Analyze the Data File"
Steps 1 through 3 are considered the initial setup. After the initial setup you may skip steps 1
through 3 and proceed to steps 4 through 11.
on page 5
on page 7
on page 9
on page 10
on page 12
on page 12
on page 13
on page 15
on page 17
on page 18
Thermo Scientific