Ipv6 Nd Dns-Server - Allied Telesis IE220 Series Manual

IP 6 C
V OMMANDS
6 -
IPV ND DNS SERVER

ipv6 nd dns-server

Overview Use this command to advertise (in Router Advertisement messages) a DNS server
for downstream devices to use.
Use the no variant of this command to delete one or all DNS server addresses.
Syntax ipv6 nd dns-server <ip-add>
no ipv6 nd dns-server [<ip-add>]
Default No DNS servers are advertised.
Mode Interface Configuration for a VLAN interface or a local loopback interface.
Example To configure vlan2 to send RAs and advertise 2001:DB8::2 as a DNS server, use the
commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
To stop advertising any DNS servers on the selected interface, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ipv6 nd accept-ra-pinfo
commands
ipv6 nd suppress-ra
show ipv6 interface
C613-50644-01 Rev B
Parameter Description
<ip-add>
Advertise a particular IPv6 address as a DNS server for
downstream devices.
configure terminal
interface vlan2
configure terminal
interface vlan2
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
no ipv6 nd suppress-ra
no ipv6 nd accept-ra-pinfo
ipv6 address 2001:DB8::1/64
ipv6 nd dns-server 2001:DB8::2
no ipv6 nd dns-server
913