Allied Telesis x510-28GTX Command Reference Manual page 915

RIP C
OMMANDS
IP RIP SEND VERSION
In the following example, the VLAN interface vlan4 is configured to send both RIP
version 2 and 1 packets.
awplus#
awplus(config)#
awplus(config-if)#
In the following example, the VLAN interface vlan4 is configured to send RIP
version 1 packets only.
awplus#
awplus(config)#
awplus(config-if)#
In the following example, the VLAN interface vlan4 is configured to send RIP
version 2 packets only.
awplus#
awplus(config)#
awplus(config-if)#
In the following example, the VLAN interface vlan3 is configured to use the RIP
version specified by the
awplus#
awplus(config)#
awplus(config-if)#
Related ip rip send version 1-compatible
Commands
version (RIP)
C613-50170-01 Rev B
configure terminal
interface vlan4
ip rip send version 2 1
configure terminal
interface vlan4
ip rip send version 1
configure terminal
interface vlan4
ip rip send version 2
version (RIP)
configure terminal
interface vlan3
no ip rip send version
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
command.
915