RIP
IP
6 C
NG FOR
V
OMMANDS
-
(IP
6 RIP
PASSIVE
INTERFACE
V
NG
passive-interface (IPv6 RIPng)
Overview
Use this command to enable suppression of routing updates on an interface.
Use the no variant of this command to disable this function.
Syntax
passive-interface <interface>
no passive-interface <interface>
Default
Disabled
Mode
Router Configuration
Examples
To enable suppression of routing updates, use the following commands:
awplus#
awplus(config)#
awplus(config-router)#
awplus#
awplus(config)#
awplus(config-router)#
C613-50170-01 Rev B
)
Parameter
Description
<interface>
The interface. For instance: vlan2.
configure terminal
router ipv6 rip
configure terminal
router ipv6 rip
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
passive-interface vlan2
no passive-interface vlan2
957