Allied Telesis x510-28GTX Command Reference Manual page 905

RIP C
OMMANDS
-
IP RIP AUTHENTICATION KEY CHAIN
5)
Example In the following example of a configuration for multiple keys authentication, a
password "toyota" is set for key 1 in key chain "cars". Authentication is enabled on
vlan2 and the authentication mode is set to MD5:
awplus#
awplus(config)#
awplus(config-keychain)#
awplus(config-keychain-key)#
awplus(config-keychain-key)#
2016 duration 43200
awplus(config-keychain-key)#
duration 43200
awplus(config-keychain-key)#
awplus(config-keychain)#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
Example In the following example, the VLAN interface vlan23 is configured to use key-chain
authentication with the keychain "mykey". See the
of how a key chain is created.
awplus#
awplus(config)#
awplus(config-if)#
Related accept-lifetime
Commands
send-lifetime
ip rip authentication mode
ip rip authentication string
key
key chain
C613-50170-01 Rev B
Specify the mode of authentication for the given interface (text or MD5),
using the following command:
awplus(config-if)#
configure terminal
key chain cars
interface vlan2
ip rip authentication key-chain cars
ip rip authentication mode md5
configure terminal
interface vlan23
ip rip authentication key-chain mykey
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
ip rip authentication mode {md5|text}
key 1
key-string toyota
accept-lifetime 10:00:00 Oct 08
send-lifetime 10:00:00 Oct 08 2016
exit
exit
key command for a description
905