Clear Ip Rip Route - Allied Telesis x510-28GTX Command Reference Manual

RIP C
OMMANDS

CLEAR IP RIP ROUTE

clear ip rip route
Overview Use this command to clear specific data from the RIP routing table.
clear ip rip route {<ip-dest-network/prefix-length>|
Syntax
static|connected|rip|ospf|invalid-routes|all}
Mode Privileged Exec
Usage Using this command with the all parameter clears the RIP table of all the routes.
Examples To clear the route 10.0.0.0/8 from the RIP routing table, use the following
command:
awplus#
C613-50170-01 Rev B
Parameter
<ip-dest-network/
prefix-length>
static
connected
rip
ospf
invalid-routes
all
clear ip rip route 10.0.0.0/8
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Removes entries which exactly match this destination
address from RIP routing table. Enter the IP address and
prefix length of the destination network.
Removes static entries from the RIP routing table.
Removes entries for connected routes from the RIP routing
table.
Removes only RIP routes from the RIP routing table.
Removes only OSPF routes from the RIP routing table.
Removes routes with metric 16 immediately. Otherwise,
these routes are not removed until RIP times out the route
after 2 minutes.
Clears the entire RIP routing table.
897