Chapter 3. REAR PANEL
CONNECTORS
PINOUTS
AND
3.1
Overview
The CDM-710 Broadcast Satellite Modem rear panel connectors, shown in Figure 3-1, provide
all necessary external connections between the modem and other equipment.
On the next page, Table 3-1 summarizes the available connectors, grouped according to service
function, and the differences between the initially released chassis and the Rev. A and later
chassis. Refer to the applicable Data Interface sections later in this chapter for pertinent connector
pinout information.
Slot 1
Slot 2
Initially released chassis (70/140 MHz shown with optional CDI-40 ASI interface)
Rev. A and later chassis (70/140 MHz shown with optional CDI-70 Gigabit Ethernet interface)
Figure 3-1. Rear Panel View
3–1