Satellite Modem > Monitor > Block Up Converter (Buc) Status; Satellite Modem > Monitor > Lnb Monitor; Satellite Modem > Monitor > Cnc Monitor - Comtech EF Data CDM-570A Installation And Operation Manual

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Optional Packet Processor - Serial/Telnet CLI Operation
9.3.8.2.3 Satellite Modem > Monitor > Block Up Converter (BUC) Status
Open the nested Block Up Converter (BUC) Status page from the Monitor page.
Selection
BUC Voltage (volts)
BUC Current (mA)
BUC Firmware Version
BUC Temperature (deg C)
BUC PLL Alarm
9.3.8.2.4 Satellite Modem > Monitor > LNB Monitor
Open the nested LNB (Low Noise Block Down Converter) page from the Monitor page.
Selection
LNB Voltage (volts)
LNB Current (mA)
9.3.8.2.5 Satellite Modem > Monitor > CnC Monitor
Open the nested CnC Monitor page from the Monitor page.
Figure 9-40. Block Up Converter (BUC) Status
Hot Key Description
[RO] Displays voltage, in volts.
[RO]
Displays current, in milliamps, from 0 to 4000.
[RO] Displays the unit running firmware version.
[RO]
Displays the unit temperature, in degrees Celsius.
[RO] Displays the Phase Lock Loop alarm status (e.g., Locked, Unlocked).
Figure 9-41. LNB Monitor (Per LNB)
Hot Key Description
[RO]
Displays voltage, in volts.
[RO] Displays current, in milliamps, from 0 to 4000.
Figure 9-42. CnC Monitor
9–57
MN-CDM570A
Revision 3