Device Description - WAGO WINSTA 770 Manual

12

Device Description

Pos : 16 /All e Seri en (Allgemei ne Module)/Ü berschriften für alle Serien/Gerätebesc hreibungGerätebesc hr eibung - Ü berschrift 1 @ 3\mod_1233756084656_21.doc x @ 27096 @ 1 @ 1
3 Device Description
Pos : 17 /Serie 770 ( WINSTA-Boxen) /Gerätebes chr eibung/Besc hreibung/Gerätebeschr eibung 0770-0629/0130- 0000 @ 6\mod_1256821013658_21.doc x @ 43960 @ @ 1
The WINSTA
sunblind motors operated via standard switches. Output group configuration,
operating time and "slat/sunblind" mode selection are performed via DIP switch.
Operating the boxes in a network configuration provides extended functionality:
1. The sunblinds of all connected boxes can optionally be moved into the
upper or lower end position via a central 24V control line. Either a weather
station, a timer or a central switch enables this functionality.
2. 2. The boxes also connect to a serial bus, allowing a higher-level control
system to access up to 16 boxes connected to one bus segment. This
operating mode addresses both individual channels and groups of boxes.
Bus failure / line break monitoring also enables the sun blinds to be moved to
their top position on a bus failure or, for example, on a wire break.
Pos : 18 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
770-629/130-000 WINSTA® Sunblind Box 4 Channel
®
Sunblind Box is a decentralized, stand-alone unit that controls 4
Version 1.2.0, valid from HW/FW version XXXX0201XX
WAGO WINSTA® 770
Manual