Table 306: Description Of Configuration Scripts For "Ports And Services" - "Network Services - WAGO 750-8207 Manual

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
Table 306: Description of Configuration Scripts for "Ports and Services" – "Network Services
Parameters Status Call-Up
Network Services
Telnet
Telnet Port
FTP
FTP Port
FTPS
FTPS Port
HTTP
HTTP Port
HTTPS
HTTPS Port
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
get_port_state
read
telnet
config_port
write port=telnet
state=<Value>
config_ssl
read
ftp-status
config_port
write
port=ftp state=<Value>
read config_ssl ftps-status
config_port port=ftps
write
state=<Value>
read config_ssl http-status
config_port port=http
write
state=<Value>
read config_ssl https-status
config_port port=https
write
state=<Value>
Appendix 387
Output/Input
Read the status of the Telnet
server.
Possible return values:
- enabled
- disabled
Possible entries for <Value>:
- enabled
- disabled
Read the status of the FTP
server.
Possible return values:
- enabled
- disabled
Possible entries for <Value>:
- enabled
- disabled
Read the status of the FTPS port.
Possible return values:
- enabled
- disabled
Activate/Deactivate FTPS.
Possible entries for <Value>:
- enabled
- disabled
Read the status of the HTTP port.
Possible return values:
- enabled
- disabled
Activate/Deactivate HTTP.
Possible entries for <Value>:
- enabled
- disabled
Read the status of the HTTPS
port.
Possible return values:
- enabled
- disabled
Activate/Deactivate HTTPS.
Possible entries for <Value>:
- enabled
- disabled
Valid
Right
away
Right
away
Right
away
Right
away
Right
away
Manual