Configuring Ip Parameters; Table 41 "Port Mode" Drop-Down Menu: Selecting The Operating Mode For Pin 2 And Pin 4 Of The Selected Io-Link Port - WAGO 765-1202/0100-0000 Product Manual

765-1202/0100-0000
Table 41: "Port Mode" Drop-Down Menu: Selecting the Operating Mode for Pin 2 and Pin 4 of the Selected IO-
Selection Option
Deactivated
Digital input, normally
open
Digital input, normally
closed
Digital Output
Digital output, static on
Setting the Filter Time for Digital Inputs
The filter time for the digital inputs can be selected from the Digital input signal filter
drop-down menu. You can select from the following values:
• No digital input filter
• 3 ms
• 15 ms
• 20 ms
If the No digital input filter option is selected, no filtering occurs.

10.3.1.4.2 Configuring IP Parameters

Product manual | Version: 1.0.0
16DIO FLD EC DC 24V 2.0A
Description
The port is used as a digital input. All elements of the port configuration are ig-
nored except for the input and output data length.
The port is used as a digital input. All elements of the port configuration are ig-
nored except for the input and output data length.
The port is used as a digital input. The signals to the port are inverted. All elements
of the port configuration are ignored except for the input and output data length.
The port is used as a digital output. All elements of the port configuration are ig-
nored except for the input and output data length.
The port is used as a digital output. The signal on pin 2 and pin 4 is permanently
set to logic 1.
Figure 15: Settings Menu Item, Device Configuration Tab
Commissioning
Link Port
61