Table of Contents
Advertisement
Commissioning
Time – Index:Subindex – Write ok: <Result>
If the operation was not successful, an error message appears in the history with error
codes from the IO-Link master and IO-Link device. The entries in the history then have
the following structure:
Time – Index:Subindex – Write failed: IOLMErrorCode(<error code of
the IO-Link master>): IOLDErrorCode(<error code of the IO-Link de-
vice>)
Deleting the Read and Write Access History
To delete the logged history of read and write operations:
•
Click the [Clear history] button.
ð The history of read and write access operations is deleted.
10.3.1.4.3 Configuring IP Parameters
The Device configuration tab allows you to do the following:
• Specify how the module gets its IP address (via the Configuration control drop-down
menu with the STATIC, BOOTP und DHCP options)
#
0
1
2
98
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Option
Description
STATIC
The module's IP address is configured statically. This is done using the module IP ad-
dress, the subnet mask and the gateway IP address entered on the "Device configura-
tion" tab.
BOOTP
The module gets its IP address with the BOOTP protocol.
DHCP
The module gets its IP address with the DHCP protocol. This is the default setting.
Figure 19: Settings Menu Item, Device Configuration Tab
Table 64: Configuration Control Drop-Down Menu
765-4501/0100-0000
Advertisement
Chapters
Table of Contents
