Commissioning; Configuring A Communication Driver For An Ethernet Link; Figure 44: Communication Parameters; Figure 45: Communication Parameters - Create Communication Channel - WAGO I/O System 750 Quickstart Reference

42 Application example: Starterkit880_App1_FUP.pro
4.6

Commissioning

The following section provides a step-by-step description of how to load the
WAGO-I/O-PRO project "Starterkit880_App1_FUB.pro" to your fieldbus
controller, how to start program execution, and how to create a boot project.
4.6.1 Configuring a Communication Driver for an ETHERNET
Link
1. To configure the communication driver for the ETHERNET link, click the
option Communication parameters in the Online menu.

Figure 44: Communication parameters

2. Then click the [NEW...] button in the "Communication parameters" dialog
box to create a new communication channel.
Figure 45: Communication Parameters – Create communication channel
WAGO-I/O-SYSTEM 750
750-880 ETHERNET Programmable Fieldbus
Quickstart Reference
Version 1.0.0