Table 26 Function Overview For Wago Webserver I/O Field And Wago Io-Link Modules - WAGO 765-4102/0100-0000 User Manual

Functions
• Display information about the connected IO-Link module
• Display the status information for the entire port
• Configure ports, e.g. set operating mode
• Read and write access to the connected IO-Link devices
• Show process data
Examples of product settings include:
• Select method for obtaining IP address
• Select the origin of the configuration data used
• Display and enter maintenance information
• Reset product to factory settings
• Load firmware onto the module
• Display and set parameters for Bluetooth
• Update Bluetooth
Function overview
The following overview shows the functions offered by WAGO Webserver I/O Field that is
integrated into the product and the menu items/tabs in the user interface that can be used
to address these functions:
Menu
Dashboard
Port X01, X02, ...
Settings
30 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
®
firmware
Table 26: Function Overview for WAGO Webserver I/O Field and WAGO IO-Link Modules
Tab
-
(All)
Information
Status
Configuration
IOL
Process data
(All)
Device configuration
Maintenance information
Factory reset
Firmware upgrade
Bluetooth
®
connection to the module
Description Section
Display product informa-
tion
Port information and set- 8 Configuring Ports
tings for IO-Link ports X01, [} 78]
X02 etc.
Display measured values
of a port and information
on the connected IO-Link
device (temperature, volt-
age, current and state on
pins 1, 2 and 4)
Display status information
across the entire port
Make port settings (such
as operating mode or
product check for valida-
tion and backup)
Access to connected IO-
Link devices
Display process data (in-
put/output)
Product settings
Configure parameters for 8 Configuring IP Param-
IP connection
eters [} 82]
Store maintenance infor- 8 Storing Maintenance
mation Information [} 82]
8 Resetsetting the Mod-
Resetting the product to
factory settings ule to the Factory Set-
tings [} 85]
Update firmware 8 Updating Firmware
[} 84]
8 Configure Bluetooth
Access via Bluetooth
[} 86]
765-4102/0100-0000