Advanced Module And Port Information; Displaying Licenses; Opening The Product Information Via Wago Webserver I/O Field; Displaying Port Information - WAGO TEchDocs 765-4501/0100-0000 Manual

8-port io-link master class a; ethernet/ip; 24 v dc; 2.0 a; 8 × m12 connection
Table of Contents

Advertisement

765-4501/0100-0000

10.3.1.2.2 Advanced Module and Port Information

The advanced module and port information includes the following measurement data that
is measured by the integrated sensors in the module:
• The module temperature
• The supply voltage (for supply cables 1L and 2L)
• The sum of all currents (for supply cables 1L and 2L)

10.3.1.2.3 Displaying Licenses

The Licenses menu item displays the page of the same name.
The menu item contains the following information:
• A list of the licensed software components the product contains
• A link for each licensed software component to the associated license terms

10.3.1.3 Opening the Product Information via WAGO Webserver I/O Field

10.3.1.3.1 Displaying Port Information

For each of the module's IO-Link ports (port X01, port X02 etc.), individual port informa-
tion can be found on the Information, Status, Configuration, IOL and Process data
tabs.
The Configuration tab also offers the option of making port settings.
You can access the port information as follows:
1. From the main menu of the Webserver (left), select the menu item which you want to
view information about.
ð The Information tab opens.
2. Click the desired tab.
ð You can now access information about the desired port.
For each port, you can select from the following five tabs:
Tab
Information
Status
Configuration
IOL
Process data
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Table 53: Tabs for Port Information and Settings (IO-Link Ports X01, X02 etc.)
Description
Displays the current measured values for temperature, voltage and cur-
rent, as well as the port state, individually for each of pin 1, pin 2 and pin
4. If an IO-Link device is connected to the port via pin 4, its product data
is also shown. This tab is pre-configured.
Displays status information for the entire port
For displaying and setting port parameters, such as the operating time or
cycle time of the port
Read/write access to data of one of the IO-Link devices connected to the
port
Displays the process data
Commissioning
85

Advertisement

Table of Contents
loading

Table of Contents