Commissioning; Configuring A Communication Driver For An Ethernet Link; Figure 40: Communication Driver - WAGO 750-880 Quickstart Reference

WAGO-I/O-SYSTEM 750
750-880, -881, -882 ETHERNET Programmable Fieldbus
3.3.6

Commissioning

This chapter describes step-by-step how to load your previously created
WAGO I/O-PRO project into your PLC, how to start program execution, and how
to create a boot project.
3.3.6.1

Configuring a Communication Driver for an ETHERNET Link

1. To set up the communication driver for the ETHERNET connection, click
on the Communication Parameters... menu item in the WAGO-I/O-PRO
dialog under the Online menu.

Figure 40: Communication driver

The "Communication Parameters" dialog appears.
Quickstart Reference
Version 1.0.0
Quickstart Description 47