Configuration Using "Wago Ethernet Settings; Figure 21: "Wago Ethernet Settings" - Start Screen - WAGO Compact Controller 100 Manual

WAGO I/O System Compact
751-9301 Compact Controller 100
</dg_
8.8.2

Configuration using "WAGO Ethernet Settings"

The "WAGO Ethernet Settings" program enables you to read system information
about your controller, make network settings and enable/disable the Web server.
Observe the software version!
To configure the controller, use at least Version 06.15.01 dated 2021-02-08 or
newer of "WAGO Ethernet Settings"!
You must select the corresponding interface after launching the "WAGO
ETHERNET Settings".
You can use the WAGO USB service cable (Item No. 763-401) or the IP network
for data communication.
Figure 21: "WAGO Ethernet Settings" – Start Screen
For this, click "Settings" and then "Communication".
In the "Communication settings" window that then opens, adapt the settings to
your needs.
Version 1.1.0, valid from FW Version 03.08.07(20)
Commissioning 99
Manual