7.6 Example of a Configuration with WAGO NETCON
The following example shows how to configure an I/O module using
WAGO NETCON:
1. Start WAGO NETCON
Fig. 7-2: WAGO NETCON icon
2. Create a new project
Create a new project and select INTERBUS as the fieldbus system.
Menu path: File - New
Fig. 7-3: Select fieldbus
3. Select master
Select a fieldbus master on the surface.
Menu path: Insert – Master
Fig. 7-4: Select controller board
Fieldbus Dependent I/O Module
INTERBUS
INTERBUS
• 29
p932x00x
p932x01e
p932x02e