I/O Config; Figure 51: Wbm Page "Io Configuration; Table 43: Wbm Page "I/O Config - WAGO -I/O-SYSTEM 750 XTR Manual

WAGO-I/O-SYSTEM 750 XTRConfiguring via the Web-Based Management System (WBM)127
750-352/040-000 FC ETHERNET G3 XTR
Pos : 69.62 /Serie 750 ( WAGO-I/O-SYST EM)/Web-Bas ed-M anagement-Sys tem WBM/Seite I/O C onfig/I/O C onfig - Ei nleitung (Koppler) (750-330, -352) @ 10\mod_1313403923757_21.doc x @ 76948 @ 2 @ 1
9.10

I/O Config

Click the link "I/O config" to view the number of modules that are connected to
your hardware.
The data in the second line are not relevant for the present fieldbus coupler,
because software-technical hardware configuration is not performed in a fieldbus
coupler. You always find the value "0" for the number of modules in the I/O
configuration.
Hardware Configuration will not be performed in a fieldbus coupler!
Note that you do not need to perform a software-technical hardware configuration
of a fieldbus coupler, this is only necessary for the functionality of a
programmable fieldbus controller in an application.
Pos : 69.63 /Serie 750 ( WAGO-I/O-SYST EM)/Web-Bas ed-M anagement-Sys tem WBM/Seite I/O C onfig/I/O C onfig - Bild (750- 352) @ 8\mod_1278931280396_21.doc x @ 59648 @ @ 1

Figure 51: WBM page "IO configuration"

Pos : 69.64 /Serie 750 ( WAGO-I/O-SYST EM)/Web-Bas ed-M anagement-Sys tem WBM/Seite I/O C onfig/I/O C onfig - Tabelle T eil 1 @ 4\mod_1243415137656_21.doc x @ 34032 @ @ 1

Table 43: WBM Page "I/O Config"

Configuration details
Entry
Number of modules on terminal bus 5
Number of modules in I/O
configuration
Pos : 70 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Value (Example) Description
Number of I/O modules (hardware)
5 Number of I/O modules in the hardware
configuration of the I/O
Manual
Version 1.3.0