Figure 5: Locked Configuration Interfacebasic Parameters Of The Selected Room; Figure 6: "General" Configuration Interface - WAGO 750-8 Series Manual

14 Table of Contents
Basic parameters of the selected room operating
Figure 5: Locked Configuration Interface
unit can be set or read from the "General" configuration page.
®
Like all other configuration pages, there is a Modbus Slave field on the top left
that can be used to select the slave. There is a [Write] button on the bottom right
for writing the set configuration data to and a [Read] button for reading the
®
current configuration from the device. The Modbus error code is output at the
bottom left.

Figure 6: "General" Configuration Interface

Anwendungshinweis