General Firewall Configuration" Page; Table 132: Wbm "General Firewall Configuration" Page - "Global Firewall - WAGO I/O System 750 Manual

WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR

15.2.1.4.2 "General Firewall Configuration" Page

The "General Firewall Configuration" page displays the global firewall settings.
"Global Firewall Parameter" Group
Table 132: WBM "General Firewall Configuration" Page – "Global Firewall Parameter" Group
Parameter
Firewall enabled entirely
ICMP echo broadcast
protection
Max. UDP connections per
second
Max. TCP connections per
second
Click [Submit] to apply the change. The change takes effect immediately.
Explanation
Enables/disables the complete functionality of the
firewall. This setting has the highest priority. If the
firewall is disabled, all other settings have no direct
effect. The configuration of the other parameters is
possible nevertheless so that you can set the
firewall parameters correctly before you enable the
firewall.
This setting is independent of the "Filter enabled"
setting in the "MAC address filter state bridge <n>"
group on the "MAC address filter state bridge <n>"
page.
Enable or disable the "ICMP echo broadcast"
protection.
You can specify the maximum number of UDP
connections per second.
You can specify the maximum number of TCP
connections per second.
Version 1.7.0, valid from FW Version 04.01.10(23)
Appendix 227
Manual