General Firewall Configuration" Page; Table 113: Wbm "General Firewall Configuration" Page - "Global Firewall - WAGO Compact Controller 100 Manual

180 Appendix

15.1.1.4.2 "General Firewall Configuration" Page

The "General Firewall Configuration" page displays the global firewall settings.
"Global Firewall Parameter" Group
Table 113: WBM "General Firewall Configuration" Page – "Global Firewall Parameter" Group
Parameter
Firewall enabled entirely
ICMP echo broadcast
protection
Max. UDP connections per
second
Max. TCP connections per
second
Click [Submit] to apply the change. The change takes effect immediately.
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
751-9301 Compact Controller 100
Explanation
Enables/disables the complete functionality of the
firewall. This setting has the highest priority. If the
firewall is disabled, all other settings have no direct
effect. The configuration of the other parameters is
possible nevertheless so that you can set the
firewall parameters correctly before you enable the
firewall.
Enable or disable the "ICMP echo broadcast"
protection.
You can specify the maximum number of UDP
connections per second.
You can specify the maximum number of TCP
connections per second.
WAGO I/O System Compact