Primary Charging Assembly Cleaning Motor; Removing The Primary Charging Assembly - Canon iR C6800 Series Service Manual

Chapter 7
2) Shift down the lever [1], and detach the black toner
bottle [2].
[2]
F-7-141
Once you have released the hopper assembly, toner
can spill over the toner bottle supply mouth of the
hopper assembly cover. Be sure to wipe off any such
toner.
F-7-142
3) Remove the 3 screws [1].
[1]
F-7-143
7-86
[1]
4) Close the black toner supply cover [1]; then, fully
open the hopper assembly [2].
[2]
[1]
F-7-144
7.11.3.4 Removing the Primary
Charging Assembly
1) Disconnect the connector [1].
2) Loosen the screw [2], and slide the primary
charging assembly stopper [3] in the direction of the
arrow; then, tighten the screw [2].
3) Detach the primary charging assembly [4] from the
machine.
[4]
[2]
F-7-145
7.11.4 Primary Charging Assembly
Cleaning Motor
7.11.4.1 Removing the Right
Cover (upper)
1) Remove the 2 screws [1], and detach the right cover
(upper) [2].
0002-6213
[1]
[3]
0003-8250