Names Of The Parts And Their Settings - Mitsubishi A950GOT User Manual

4 NAMES OF THE PARTS AND THEIR
SETTINGS
(1) Names of the Parts and Their Settings of the A95 GOT are indicated below.
1)
POWER
9) 7)
4) *1
*1: The shape of the interface section changes depending on the GOT.
No. Name
1) Display section
2) Reset button
Extension number setting switch, (A951GOT only)
3)
I/O slot setting switch (A951GOT only)
RS-422 communication interface (A950GOT only)
Bus communication interface for QCPU (Q mode)
(A951GOT only)
4)
Bus communication interface
(A951GOT only)
RS-232C communication interface
(A953GOT only)
5) Communication module interface (A956GOT only)
6) RS-232C interface
7) Option module interface
8) Terminal block
9) Mounting fixture fitting portion
10) Ground terminal
11) Rating plate
9)
6)
Shows the screen
Used to reset the hardware of the GOT (invalid for bus connection)
Used to set the extension number for GOT assignment
1 to 7 : Extension number
8, 9, 0 : Must not be used
Used to set the I/O slot number for GOT assignment
0 to 7 : I/O slot number
8, 9 : Must not be used
For RS-422 communication connection
(D-sub 25-pin female metric screw type)
For bus connection cable connection (For QCPU (Q mode))
For bus communication cable connection
(For A/QnA/Motion controller CPU)
For RS-232C communication cable connection
(D-sub 9-pin male inch screw type)
Interface for loading the communication module
For connection of personal computer
For connecting the bar code reader (D-sub 9-pin male inch screw type)
For connection Printer I/F module, Memory card I/F module, External I/O module
For power input
For mounting fixture fitting
For earthling (For safety, please make sure to ground this terminal.)
Get other manuals https://www.bkmanuals.com
5)
8) 10) 11)
Description
---
3)
2)
4 - 1
1
2
3
4
5
6
7
8