Installation, Relocation, Storage And Connection - NEC Bull NovaScale R620 User Manual

Installation, Relocation, Storage and Connection

Disconnect the power cord(s) before installing or removing the equipment.
Be sure to power off the equipment and unplug its power cords from the wall outlet before
installation/relocation. All voltage is removed only when the power cords are unplugged.
Do not install or store the equipment in an unsuitable place.
Install or store the equipment in such a place as specified in this User's Guide. Avoid the following,
or there is a risk of a fire.
a dusty place
a humid place located near a boiler, etc
a place exposed to direct sunlight
an unstable place
Be careful not to hurt your fingers.
Exercise great care not to hurt your fingers on the rail when you mount/dismount the equipment
into/from the rack.
Do not use or store this product in corrosive environment.
Avoid the usage or storage of this product in an environment which may be exposed to corrosive
gases, such as those including but not limited to :
sulphur dioxide, hydrogen sulphide, nitrogen dioxide, chlorine, ammonia and/or ozone.
Avoid installing this product in a dusty environment or one that may be exposed to corrosive
materials such as sodium chloride and/or sulphur.
Avoid installing this product in an environment which may have excessive metal flakes or
conductive particles in the air.
Such environments may cause corrosion or short circuits within this product, resulting in not only
damage to this product, but may even lead to be a fire hazard.
If there are any concerns regarding the environment at the planned site of installation or storage,
please contact your sales agent．
NovaScale R620 User Guide
WARNING
CAUTION
1-7