3.2.2
Hardware requirements
Required on the IOC side
Required on the PCPro side
Use the same modem on IOC side and PCPro side.
Note 1:
3.3 TCP/IP Connection
3.3.1
Connection method
STEP 1:
Connect in any of the following methods.
In the case of Local Connection:
Connect between PCPro and HUB by using LAN cable.
Product Name
Modem Note 1
2400 RS-232C CA-3 Cable
SV 4PORT CA-A Cable
COT Circuit Card
LC Circuit Card
IOC Circuit Card
PC
Modem Note 1
RS-232C Cable
AT Modem in the marketplace, compliant to
the following specification.
•
Modem supporting AT commands
•
Synchronous/Asynchronous communica-
tion
•
Supporting MNP
•
Duplex
•
For the specifications of the PC required,
see "Operating Environments and
Conditions".
AT Modem in the marketplace, compliant to
the following specification.
•
Modem supporting AT commands
•
Synchronous/Asynchronous communica-
tion
•
Supporting MNP
•
Duplex
– 21 –
CHAPTER 3
Setting Up PCPro
Remarks