Oai With Tcp/Ip-Ethernet; Figure 1-3 System Outline Of Oai With Tcp/Ip-Ethernet - NEC NEAX 2000 IVS2 System Manual

CHAPTER 1 GENERAL INFORMATION
System Outline

OAI with TCP/IP-Ethernet

The PBX is equipped with an interface to transmit/receive the control signals between the PBX
and the Ethernet. The interface supports TCP/IP protocol. For adding the interface with TCP/IP,
the ETHER card (CC01) (Ethernet Gateway Controller) is required in addition to the AP01 card.
Figure 1-3 shows the system outline of OAI with TCP/IP-Ethernet.

Figure 1-3 System Outline of OAI with TCP/IP-Ethernet

term
D
term
D
AP01: OAI INTERFACE CARD
ETHER: ETHERNET CONTROLLER (CC01)
Page 8
PBX
DLC
DLC
TDSW
MP
10 BASE-T
ETHER
(CC01)
AP01
HUB
2
NEAX2000 IVS OAI System Manual
ND-70922 (E), Issue 1.0