Inserting The Communication Manager Cd-Rom Into The Media Server; Copying Communication Manager To The Media Server - Avaya S8100 Series Manual

Media servers and gateways
Hide thumbs Also See for S8100 Series:
Table of Contents

Advertisement

Inserting the Communication Manager CD-ROM into the media
server
Insert the CD-ROM that contains Communication Manager into the CD-ROM drive on the media
server. Close the tray.
Note:
You can copy Communication Manager software from an http or tftp server onto
Note:
the media server. In this case, skip this step.
!
CAUTION:
When you are upgrading the media server as a primary controller, you must
CAUTION:
check Product Support Notice #739U for the supported upgrade paths. If you
attempt to upgrade the media server to a release that is not supported as an
upgrade path, you might corrupt the translations.
Also, you must check PSN #739U for compatibility of software loads between the
primary controller and any LSPs or ESSs. If the software loads of the primary
controller and the LSPs/ESSs are incompatible, then file synchronization
between the primary controller and the LSPs/ESSs can cause translation
corruption on the LSPs/ESSs.
To check PSN #739U, from any computer, access http://support.avaya.com.
Select Product Support Notices > View All Documents > PSN #739U.

Copying Communication Manager to the media server

To copy Communication Manager to the media server:
1. On the browser toolbar, click Refresh to reload the current page.
Upgrade tasks for the first media server
Issue 2.1 June 2006
223

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents