CHAPTER 20 EXTENDED I/O SERIAL INTERFACE
20.3.4
Interrupt Function
Extended I/O serial interface can generate the interrupt request to the CPU.
Interruption Function of Extended I/O Serial Interface
Upon completion of data transfer, SIR bit indicating an interrupt flag is set, and when SIE bit of the SMCS
enabling interrupts is "1", the interrupt request is output to the CPU.
Figure 20.3-9 shows the output timing of interrupt signal.
RD/WR of SDR
474
Figure 20.3-9 Output Timing of Interruption Signal
SCK
BUSY
SIE=1
SIR
SOT
DO6
(Transfer complete)
MODE=1
DO7
(Data hold)