25.6.6
Flash Memory Sector Erase Resumption
The procedure to issue the sector erase restart command and restart the flash memory
sector erase that is suspended is described.
Flash Memory Sector Erase Resumption
To restart the suspended sector erase, you can restart by sending the sector erase restart command
sequentially in the command sequence table (See Table 25.4-1) to the flash memory.
The sector erase resume command resumes sector erasing suspended by the sector erase suspend command.
This command can be executed by writing the erase restart code (30
indicate arbitrary address in the flash memory area.
Further, issuing the sector erase restart command is ignored while erasing a sector.
CHAPTER 25 3M-BIT FLASH MEMORY
), for which the address should
H
585